Hadoop: Capacity Scheduler

Purpose

This document describes the CapacityScheduler, a pluggable scheduler for Hadoop which allows for multiple-tenants to securely share a large cluster such that their applications are allocated resources in a timely manner under constraints of allocated capacities.

Overview

The CapacityScheduler is designed to run Hadoop applications as a shared, multi-tenant cluster in an operator-friendly manner while maximizing the throughput and the utilization of the cluster.

Traditionally each organization has it own private set of compute resources that have sufficient capacity to meet the organization’s SLA under peak or near-peak conditions. This generally leads to poor average utilization and overhead of managing multiple independent clusters, one per each organization. Sharing clusters between organizations is a cost-effective manner of running large Hadoop installations since this allows them to reap benefits of economies of scale without creating private clusters. However, organizations are concerned about sharing a cluster because they are worried about others using the resources that are critical for their SLAs.

The CapacityScheduler is designed to allow sharing a large cluster while giving each organization capacity guarantees. The central idea is that the available resources in the Hadoop cluster are shared among multiple organizations who collectively fund the cluster based on their computing needs. There is an added benefit that an organization can access any excess capacity not being used by others. This provides elasticity for the organizations in a cost-effective manner.

Sharing clusters across organizations necessitates strong support for multi-tenancy since each organization must be guaranteed capacity and safe-guards to ensure the shared cluster is impervious to single rogue application or user or sets thereof. The CapacityScheduler provides a stringent set of limits to ensure that a single application or user or queue cannot consume disproportionate amount of resources in the cluster. Also, the CapacityScheduler provides limits on initialized and pending applications from a single user and queue to ensure fairness and stability of the cluster.

The primary abstraction provided by the CapacityScheduler is the concept of queues. These queues are typically setup by administrators to reflect the economics of the shared cluster.

To provide further control and predictability on sharing of resources, the CapacityScheduler supports hierarchical queues to ensure resources are shared among the sub-queues of an organization before other queues are allowed to use free resources, thereby providing affinity for sharing free resources among applications of a given organization.

Features

The CapacityScheduler supports the following features:

  • Hierarchical Queues - Hierarchy of queues is supported to ensure resources are shared among the sub-queues of an organization before other queues are allowed to use free resources, thereby providing more control and predictability.

  • Capacity Guarantees - Queues are allocated a fraction of the capacity of the grid in the sense that a certain capacity of resources will be at their disposal. All applications submitted to a queue will have access to the capacity allocated to the queue. Administrators can configure soft limits and optional hard limits on the capacity allocated to each queue.

  • Security - Each queue has strict ACLs which controls which users can submit applications to individual queues. Also, there are safe-guards to ensure that users cannot view and/or modify applications from other users. Also, per-queue and system administrator roles are supported.

  • Elasticity - Free resources can be allocated to any queue beyond its capacity. When there is demand for these resources from queues running below capacity at a future point in time, as tasks scheduled on these resources complete, they will be assigned to applications on queues running below the capacity (preemption is also supported). This ensures that resources are available in a predictable and elastic manner to queues, thus preventing artificial silos of resources in the cluster which helps utilization.

  • Multi-tenancy - Comprehensive set of limits are provided to prevent a single application, user and queue from monopolizing resources of the queue or the cluster as a whole to ensure that the cluster isn’t overwhelmed.

  • Operability

    • Runtime Configuration - The queue definitions and properties such as capacity, ACLs can be changed, at runtime, by administrators in a secure manner to minimize disruption to users. Also, a console is provided for users and administrators to view current allocation of resources to various queues in the system. Administrators can add additional queues at runtime, but queues cannot be deleted at runtime.

    • Drain applications - Administrators can stop queues at runtime to ensure that while existing applications run to completion, no new applications can be submitted. If a queue is in STOPPED state, new applications cannot be submitted to itself or any of its child queues. Existing applications continue to completion, thus the queue can be drained gracefully. Administrators can also start the stopped queues.

  • Resource-based Scheduling - Support for resource-intensive applications, where-in a application can optionally specify higher resource-requirements than the default, thereby accommodating applications with differing resource requirements. Currently, memory is the resource requirement supported.

  • Queue Mapping based on User or Group - This feature allows users to map a job to a specific queue based on the user or group.

  • Priority Scheduling - This feature allows applications to be submitted and scheduled with different priorities. Higher integer value indicates higher priority for an application. Currently Application priority is supported only for FIFO ordering policy.

  • Absolute Resource Configuration - Administrators could specify absolute resources to a queue instead of providing percentage based values. This provides better control for admins to configure required amount of resources for a given queue.

  • Dynamic Auto-Creation and Management of Leaf Queues - This feature supports auto-creation of leaf queues in conjunction with queue-mapping which currently supports user-group based queue mappings for application placement to a queue. The scheduler also supports capacity management for these queues based on a policy configured on the parent queue.

Configuration

Setting up ResourceManager to use CapacityScheduler

To configure the ResourceManager to use the CapacityScheduler, set the following property in the conf/yarn-site.xml:

Property Value
yarn.resourcemanager.scheduler.class org.apache.hadoop.yarn.server.resourcemanager.scheduler.capacity.CapacityScheduler

Setting up queues

etc/hadoop/capacity-scheduler.xml is the configuration file for the CapacityScheduler.

The CapacityScheduler has a predefined queue called root. All queues in the system are children of the root queue.

Further queues can be setup by configuring yarn.scheduler.capacity.root.queues with a list of comma-separated child queues.

The configuration for CapacityScheduler uses a concept called queue path to configure the hierarchy of queues. The queue path is the full path of the queue’s hierarchy, starting at root, with . (dot) as the delimiter.

A given queue’s children can be defined with the configuration knob: yarn.scheduler.capacity.<queue-path>.queues. Children do not inherit properties directly from the parent unless otherwise noted.

Here is an example with three top-level child-queues a, b and c and some sub-queues for a and b:

<property>
  <name>yarn.scheduler.capacity.root.queues</name>
  <value>a,b,c</value>
  <description>The queues at the this level (root is the root queue).
  </description>
</property>

<property>
  <name>yarn.scheduler.capacity.root.a.queues</name>
  <value>a1,a2</value>
  <description>The queues at the this level (root is the root queue).
  </description>
</property>

<property>
  <name>yarn.scheduler.capacity.root.b.queues</name>
  <value>b1,b2,b3</value>
  <description>The queues at the this level (root is the root queue).
  </description>
</property>

Queue Properties

  • Resource Allocation
Property Description
yarn.scheduler.capacity.<queue-path>.capacity Queue capacity in percentage (%) as a float (e.g. 12.5) OR as absolute resource queue minimum capacity. The sum of capacities for all queues, at each level, must be equal to 100. However if absolute resource is configured, sum of absolute resources of child queues could be less than it’s parent absolute resource capacity. Applications in the queue may consume more resources than the queue’s capacity if there are free resources, providing elasticity.
yarn.scheduler.capacity.<queue-path>.maximum-capacity Maximum queue capacity in percentage (%) as a float OR as absolute resource queue maximum capacity. This limits the elasticity for applications in the queue. 1) Value is between 0 and 100. 2) Admin needs to make sure absolute maximum capacity >= absolute capacity for each queue. Also, setting this value to -1 sets maximum capacity to 100%.
yarn.scheduler.capacity.<queue-path>.minimum-user-limit-percent Each queue enforces a limit on the percentage of resources allocated to a user at any given time, if there is demand for resources. The user limit can vary between a minimum and maximum value. The former (the minimum value) is set to this property value and the latter (the maximum value) depends on the number of users who have submitted applications. For e.g., suppose the value of this property is 25. If two users have submitted applications to a queue, no single user can use more than 50% of the queue resources. If a third user submits an application, no single user can use more than 33% of the queue resources. With 4 or more users, no user can use more than 25% of the queues resources. A value of 100 implies no user limits are imposed. The default is 100. Value is specified as a integer.
yarn.scheduler.capacity.<queue-path>.user-limit-factor The multiple of the queue capacity which can be configured to allow a single user to acquire more resources. By default this is set to 1 which ensures that a single user can never take more than the queue’s configured capacity irrespective of how idle the cluster is. Value is specified as a float.
yarn.scheduler.capacity.<queue-path>.maximum-allocation-mb The per queue maximum limit of memory to allocate to each container request at the Resource Manager. This setting overrides the cluster configuration yarn.scheduler.maximum-allocation-mb. This value must be smaller than or equal to the cluster maximum.
yarn.scheduler.capacity.<queue-path>.maximum-allocation-vcores The per queue maximum limit of virtual cores to allocate to each container request at the Resource Manager. This setting overrides the cluster configuration yarn.scheduler.maximum-allocation-vcores. This value must be smaller than or equal to the cluster maximum.
yarn.scheduler.capacity.<queue-path>.user-settings.<user-name>.weight This floating point value is used when calculating the user limit resource values for users in a queue. This value will weight each user more or less than the other users in the queue. For example, if user A should receive 50% more resources in a queue than users B and C, this property will be set to 1.5 for user A. Users B and C will default to 1.0.
  • Resource Allocation using Absolute Resources configuration

CapacityScheduler supports configuration of absolute resources instead of providing Queue capacity in percentage. As mentioned in above configuration section for yarn.scheduler.capacity.<queue-path>.capacity and yarn.scheduler.capacity.<queue-path>.max-capacity, administrator could specify an absolute resource value like [memory=10240,vcores=12]. This is a valid configuration which indicates 10GB Memory and 12 VCores.

  • Running and Pending Application Limits

The CapacityScheduler supports the following parameters to control the running and pending applications:

Property Description
yarn.scheduler.capacity.maximum-applications / yarn.scheduler.capacity.<queue-path>.maximum-applications Maximum number of applications in the system which can be concurrently active both running and pending. Limits on each queue are directly proportional to their queue capacities and user limits. This is a hard limit and any applications submitted when this limit is reached will be rejected. Default is 10000. This can be set for all queues with yarn.scheduler.capacity.maximum-applications and can also be overridden on a per queue basis by setting yarn.scheduler.capacity.<queue-path>.maximum-applications. Integer value expected.
yarn.scheduler.capacity.maximum-am-resource-percent / yarn.scheduler.capacity.<queue-path>.maximum-am-resource-percent Maximum percent of resources in the cluster which can be used to run application masters - controls number of concurrent active applications. Limits on each queue are directly proportional to their queue capacities and user limits. Specified as a float - ie 0.5 = 50%. Default is 10%. This can be set for all queues with yarn.scheduler.capacity.maximum-am-resource-percent and can also be overridden on a per queue basis by setting yarn.scheduler.capacity.<queue-path>.maximum-am-resource-percent
  • Queue Administration & Permissions

The CapacityScheduler supports the following parameters to the administer the queues:

Property Description
yarn.scheduler.capacity.<queue-path>.state The state of the queue. Can be one of RUNNING or STOPPED. If a queue is in STOPPED state, new applications cannot be submitted to itself or any of its child queues. Thus, if the root queue is STOPPED no applications can be submitted to the entire cluster. Existing applications continue to completion, thus the queue can be drained gracefully. Value is specified as Enumeration.
yarn.scheduler.capacity.root.<queue-path>.acl_submit_applications The ACL which controls who can submit applications to the given queue. If the given user/group has necessary ACLs on the given queue or one of the parent queues in the hierarchy they can submit applications. ACLs for this property are inherited from the parent queue if not specified.
yarn.scheduler.capacity.root.<queue-path>.acl_administer_queue The ACL which controls who can administer applications on the given queue. If the given user/group has necessary ACLs on the given queue or one of the parent queues in the hierarchy they can administer applications. ACLs for this property are inherited from the parent queue if not specified.

Note: An ACL is of the form user1,user2 space group1,group2. The special value of * implies anyone. The special value of space implies no one. The default is * for the root queue if not specified.

  • Queue Mapping based on User or Group

The CapacityScheduler supports the following parameters to configure the queue mapping based on user or group:

Property Description
yarn.scheduler.capacity.queue-mappings This configuration specifies the mapping of user or group to a specific queue. You can map a single user or a list of users to queues. Syntax: [u or g]:[name]:[queue_name][,next_mapping]*. Here, u or g indicates whether the mapping is for a user or group. The value is u for user and g for group. name indicates the user name or group name. To specify the user who has submitted the application, %user can be used. queue_name indicates the queue name for which the application has to be mapped. To specify queue name same as user name, %user can be used. To specify queue name same as the name of the primary group for which the user belongs to, %primary_group can be used.
yarn.scheduler.capacity.queue-mappings-override.enable This function is used to specify whether the user specified queues can be overridden. This is a Boolean value and the default value is false.

Example:

 <property>
   <name>yarn.scheduler.capacity.queue-mappings</name>
   <value>u:user1:queue1,g:group1:queue2,u:%user:%user,u:user2:%primary_group</value>
   <description>
     Here, <user1> is mapped to <queue1>, <group1> is mapped to <queue2>, 
     maps users to queues with the same name as user, <user2> is mapped 
     to queue name same as <primary group> respectively. The mappings will be 
     evaluated from left to right, and the first valid mapping will be used.
   </description>
 </property>
  • Queue lifetime for applications

    The CapacityScheduler supports the following parameters to lifetime of an application:

Property Description
yarn.scheduler.capacity.<queue-path>.maximum-application-lifetime Maximum lifetime of an application which is submitted to a queue in seconds. Any value less than or equal to zero will be considered as disabled. This will be a hard time limit for all applications in this queue. If positive value is configured then any application submitted to this queue will be killed after exceeds the configured lifetime. User can also specify lifetime per application basis in application submission context. But user lifetime will be overridden if it exceeds queue maximum lifetime. It is point-in-time configuration. Note : Configuring too low value will result in killing application sooner. This feature is applicable only for leaf queue.
yarn.scheduler.capacity.root.<queue-path>.default-application-lifetime Default lifetime of an application which is submitted to a queue in seconds. Any value less than or equal to zero will be considered as disabled. If the user has not submitted application with lifetime value then this value will be taken. It is point-in-time configuration. Note : Default lifetime can’t exceed maximum lifetime. This feature is applicable only for leaf queue.

Setup for application priority.

Application priority works only along with FIFO ordering policy. Default ordering policy is FIFO.

Default priority for an application can be at cluster level and queue level.

  • Cluster-level priority : Any application submitted with a priority greater than the cluster-max priority will have its priority reset to the cluster-max priority. $HADOOP_HOME/etc/hadoop/yarn-site.xml is the configuration file for cluster-max priority.
Property Description
yarn.cluster.max-application-priority Defines maximum application priority in a cluster.
  • Leaf Queue-level priority : Each leaf queue provides default priority by the administrator. The queue’s default priority will be used for any application submitted without a specified priority. $HADOOP_HOME/etc/hadoop/capacity-scheduler.xml is the configuration file for queue-level priority.
Property Description
yarn.scheduler.capacity.root.<leaf-queue-path>.default-application-priority Defines default application priority in a leaf queue.

Note: Priority of an application will not be changed when application is moved to different queue.

Capacity Scheduler container preemption

The CapacityScheduler supports preemption of container from the queues whose resource usage is more than their guaranteed capacity. The following configuration parameters need to be enabled in yarn-site.xml for supporting preemption of application containers.

Property Description
yarn.resourcemanager.scheduler.monitor.enable Enable a set of periodic monitors (specified in yarn.resourcemanager.scheduler.monitor.policies) that affect the scheduler. Default value is false.
yarn.resourcemanager.scheduler.monitor.policies The list of SchedulingEditPolicy classes that interact with the scheduler. Configured policies need to be compatible with the scheduler. Default value is org.apache.hadoop.yarn.server.resourcemanager.monitor.capacity.ProportionalCapacityPreemptionPolicy which is compatible with CapacityScheduler

The following configuration parameters can be configured in yarn-site.xml to control the preemption of containers when ProportionalCapacityPreemptionPolicy class is configured for yarn.resourcemanager.scheduler.monitor.policies

Property Description
yarn.resourcemanager.monitor.capacity.preemption.observe_only If true, run the policy but do not affect the cluster with preemption and kill events. Default value is false
yarn.resourcemanager.monitor.capacity.preemption.monitoring_interval Time in milliseconds between invocations of this ProportionalCapacityPreemptionPolicy policy. Default value is 3000
yarn.resourcemanager.monitor.capacity.preemption.max_wait_before_kill Time in milliseconds between requesting a preemption from an application and killing the container. Default value is 15000
yarn.resourcemanager.monitor.capacity.preemption.total_preemption_per_round Maximum percentage of resources preempted in a single round. By controlling this value one can throttle the pace at which containers are reclaimed from the cluster. After computing the total desired preemption, the policy scales it back within this limit. Default value is 0.1
yarn.resourcemanager.monitor.capacity.preemption.max_ignored_over_capacity Maximum amount of resources above the target capacity ignored for preemption. This defines a deadzone around the target capacity that helps prevent thrashing and oscillations around the computed target balance. High values would slow the time to capacity and (absent natural.completions) it might prevent convergence to guaranteed capacity. Default value is 0.1
yarn.resourcemanager.monitor.capacity.preemption.natural_termination_factor Given a computed preemption target, account for containers naturally expiring and preempt only this percentage of the delta. This determines the rate of geometric convergence into the deadzone (MAX_IGNORED_OVER_CAPACITY). For example, a termination factor of 0.5 will reclaim almost 95% of resources within 5 * #WAIT_TIME_BEFORE_KILL, even absent natural termination. Default value is 0.2

The CapacityScheduler supports the following configurations in capacity-scheduler.xml to control the preemption of application containers submitted to a queue.

Property Description
yarn.scheduler.capacity.<queue-path>.disable_preemption This configuration can be set to true to selectively disable preemption of application containers submitted to a given queue. This property applies only when system wide preemption is enabled by configuring yarn.resourcemanager.scheduler.monitor.enable to true and yarn.resourcemanager.scheduler.monitor.policies to ProportionalCapacityPreemptionPolicy. If this property is not set for a queue, then the property value is inherited from the queue’s parent. Default value is false.
yarn.scheduler.capacity.<queue-path>.intra-queue-preemption.disable_preemption This configuration can be set to true to selectively disable intra-queue preemption of application containers submitted to a given queue. This property applies only when system wide preemption is enabled by configuring yarn.resourcemanager.scheduler.monitor.enable to true, yarn.resourcemanager.scheduler.monitor.policies to ProportionalCapacityPreemptionPolicy, and yarn.resourcemanager.monitor.capacity.preemption.intra-queue-preemption.enabled to true. If this property is not set for a queue, then the property value is inherited from the queue’s parent. Default value is false.

Reservation Properties

  • Reservation Administration & Permissions

The CapacityScheduler supports the following parameters to control the creation, deletion, update, and listing of reservations. Note that any user can update, delete, or list their own reservations. If reservation ACLs are enabled but not defined, everyone will have access. In the examples below, <queue> is the queue name. For example, to set the reservation ACL to administer reservations on the default queue, use the property yarn.scheduler.capacity.root.default.acl_administer_reservations

Property Description
yarn.scheduler.capacity.root.<queue>.acl_administer_reservations The ACL which controls who can administer reservations to the given queue. If the given user/group has necessary ACLs on the given queue or they can submit, delete, update and list all reservations. ACLs for this property are not inherited from the parent queue if not specified.
yarn.scheduler.capacity.root.<queue>.acl_list_reservations The ACL which controls who can list reservations to the given queue. If the given user/group has necessary ACLs on the given queue they can list all applications. ACLs for this property are not inherited from the parent queue if not specified.
yarn.scheduler.capacity.root.<queue>.acl_submit_reservations The ACL which controls who can submit reservations to the given queue. If the given user/group has necessary ACLs on the given queue they can submit reservations. ACLs for this property are not inherited from the parent queue if not specified.

Configuring ReservationSystem with CapacityScheduler

The CapacityScheduler supports the ReservationSystem which allows users to reserve resources ahead of time. The application can request the reserved resources at runtime by specifying the reservationId during submission. The following configuration parameters can be configured in yarn-site.xml for ReservationSystem.

Property Description
yarn.resourcemanager.reservation-system.enable Mandatory parameter: to enable the ReservationSystem in the ResourceManager. Boolean value expected. The default value is false, i.e. ReservationSystem is not enabled by default.
yarn.resourcemanager.reservation-system.class Optional parameter: the class name of the ReservationSystem. The default value is picked based on the configured Scheduler, i.e. if CapacityScheduler is configured, then it is CapacityReservationSystem.
yarn.resourcemanager.reservation-system.plan.follower Optional parameter: the class name of the PlanFollower that runs on a timer, and synchronizes the CapacityScheduler with the Plan and viceversa. The default value is picked based on the configured Scheduler, i.e. if CapacityScheduler is configured, then it is CapacitySchedulerPlanFollower.
yarn.resourcemanager.reservation-system.planfollower.time-step Optional parameter: the frequency in milliseconds of the PlanFollower timer. Long value expected. The default value is 1000.

The ReservationSystem is integrated with the CapacityScheduler queue hierachy and can be configured for any LeafQueue currently. The CapacityScheduler supports the following parameters to tune the ReservationSystem:

Property Description
yarn.scheduler.capacity.<queue-path>.reservable Mandatory parameter: indicates to the ReservationSystem that the queue’s resources is available for users to reserve. Boolean value expected. The default value is false, i.e. reservations are not enabled in LeafQueues by default.
yarn.scheduler.capacity.<queue-path>.reservation-agent Optional parameter: the class name that will be used to determine the implementation of the ReservationAgent which will attempt to place the user’s reservation request in the Plan. The default value is org.apache.hadoop.yarn.server.resourcemanager.reservation.planning.AlignedPlannerWithGreedy.
yarn.scheduler.capacity.<queue-path>.reservation-move-on-expiry Optional parameter to specify to the ReservationSystem whether the applications should be moved or killed to the parent reservable queue (configured above) when the associated reservation expires. Boolean value expected. The default value is true indicating that the application will be moved to the reservable queue.
yarn.scheduler.capacity.<queue-path>.show-reservations-as-queues Optional parameter to show or hide the reservation queues in the Scheduler UI. Boolean value expected. The default value is false, i.e. reservation queues will be hidden.
yarn.scheduler.capacity.<queue-path>.reservation-policy Optional parameter: the class name that will be used to determine the implementation of the SharingPolicy which will validate if the new reservation doesn’t violate any invariants.. The default value is org.apache.hadoop.yarn.server.resourcemanager.reservation.CapacityOverTimePolicy.
yarn.scheduler.capacity.<queue-path>.reservation-window Optional parameter representing the time in milliseconds for which the SharingPolicy will validate if the constraints in the Plan are satisfied. Long value expected. The default value is one day.
yarn.scheduler.capacity.<queue-path>.instantaneous-max-capacity Optional parameter: maximum capacity at any time in percentage (%) as a float that the SharingPolicy allows a single user to reserve. The default value is 1, i.e. 100%.
yarn.scheduler.capacity.<queue-path>.average-capacity Optional parameter: the average allowed capacity which will aggregated over the ReservationWindow in percentage (%) as a float that the SharingPolicy allows a single user to reserve. The default value is 1, i.e. 100%.
yarn.scheduler.capacity.<queue-path>.reservation-planner Optional parameter: the class name that will be used to determine the implementation of the Planner which will be invoked if the Plan capacity fall below (due to scheduled maintenance or node failuers) the user reserved resources. The default value is org.apache.hadoop.yarn.server.resourcemanager.reservation.planning.SimpleCapacityReplanner which scans the Plan and greedily removes reservations in reversed order of acceptance (LIFO) till the reserved resources are within the Plan capacity
yarn.scheduler.capacity.<queue-path>.reservation-enforcement-window Optional parameter representing the time in milliseconds for which the Planner will validate if the constraints in the Plan are satisfied. Long value expected. The default value is one hour.

Dynamic Auto-Creation and Management of Leaf Queues

The CapacityScheduler supports auto-creation of leaf queues under parent queues which have been configured to enable this feature.

  • Setup for dynamic auto-created leaf queues through queue mapping

user-group queue mapping(s) listed in yarn.scheduler.capacity.queue-mappings need to specify an additional parent queue parameter to identify which parent queue the auto-created leaf queues need to be created under. Refer above Queue Mapping based on User or Group section for more details. Please note that such parent queues also need to enable auto-creation of child queues as mentioned in Parent queue configuration for dynamic leaf queue creation and management section below

Example:

 <property>
   <name>yarn.scheduler.capacity.queue-mappings</name>
   <value>u:user1:queue1,g:group1:queue2,u:user2:%primary_group,u:%user:parent1.%user</value>
   <description>
     Here, u:%user:parent1.%user mapping allows any <user> other than user1,
     user2 to be mapped to its own user specific leaf queue which
     will be auto-created under <parent1>.
   </description>
 </property>
  • Parent queue configuration for dynamic leaf queue auto-creation and management

The Dynamic Queue Auto-Creation and Management feature is integrated with the CapacityScheduler queue hierarchy and can be configured for a ParentQueue currently to auto-create leaf queues. Such parent queues do not support other pre-configured queues to co-exist along with auto-created queues. The CapacityScheduler supports the following parameters to enable auto-creation of queues

Property Description
yarn.scheduler.capacity.<queue-path>.auto-create-child-queue.enabled Mandatory parameter: Indicates to the CapacityScheduler that auto leaf queue creation needs to be enabled for the specified parent queue. Boolean value expected. The default value is false, i.e. auto leaf queue creation is not enabled in ParentQueue by default.
yarn.scheduler.capacity.<queue-path>.auto-create-child-queue.management-policy Optional parameter: the class name that will be used to determine the implementation of the AutoCreatedQueueManagementPolicy which will manage leaf queues and their capacities dynamically under this parent queue. The default value is org.apache.hadoop.yarn.server.resourcemanager.scheduler.capacity.queuemanagement.GuaranteedOrZeroCapacityOverTimePolicy. Users or groups might submit applications to the auto-created leaf queues for a limited time and stop using them. Hence there could be more number of leaf queues auto-created under the parent queue than its guaranteed capacity. The current policy implementation allots either configured or zero capacity on a best-effort basis based on availability of capacity on the parent queue and the application submission order across leaf queues.
  • Configuring Auto-Created Leaf Queues with CapacityScheduler

The parent queue which has been enabled for auto leaf queue creation,supports the configuration of template parameters for automatic configuration of the auto-created leaf queues. The auto-created queues support all of the leaf queue configuration parameters except for Queue ACL, Absolute Resource configurations and Node Labels. Queue ACLs and Node Labels are currently inherited from the parent queue i.e they are not configurable on the leaf queue template

Property Description
yarn.scheduler.capacity.<queue-path>.leaf-queue-template.capacity Mandatory parameter: Specifies the minimum guaranteed capacity for the auto-created leaf queues. Currently Absolute Resource configurations are not supported on auto-created leaf queues
yarn.scheduler.capacity.<queue-path>.leaf-queue-template.<leaf-queue-property> Optional parameter: For other queue parameters that can be configured on auto-created leaf queues like maximum-capacity, user-limit-factor, maximum-am-resource-percent … - Refer Queue Properties section

Example:

 <property>
   <name>yarn.scheduler.capacity.root.parent1.auto-create-child-queue.enabled</name>
   <value>true</value>
 </property>
 <property>
    <name>yarn.scheduler.capacity.root.parent1.leaf-queue-template.capacity</name>
    <value>5</value>
 </property>
 <property>
    <name>yarn.scheduler.capacity.root.parent1.leaf-queue-template.maximum-capacity</name>
    <value>100</value>
 </property>
 <property>
    <name>yarn.scheduler.capacity.root.parent1.leaf-queue-template.user-limit-factor</name>
    <value>3.0</value>
 </property>
 <property>
    <name>yarn.scheduler.capacity.root.parent1.leaf-queue-template.ordering-policy</name>
    <value>fair</value>
 </property>
  • Scheduling Edit Policy configuration for auto-created queue management

Admins need to specify an additional org.apache.hadoop.yarn.server.resourcemanager.scheduler.capacity.QueueManagementDynamicEditPolicy scheduling edit policy to the list of current scheduling edit policies as a comma separated string in yarn.resourcemanager.scheduler.monitor.policies configuration. For more details, refer Capacity Scheduler container preemption section above

Property Description
yarn.resourcemanager.monitor.capacity.queue-management.monitoring-interval Time in milliseconds between invocations of this QueueManagementDynamicEditPolicy policy. Default value is 1500

Other Properties

  • Resource Calculator
Property Description
yarn.scheduler.capacity.resource-calculator The ResourceCalculator implementation to be used to compare Resources in the scheduler. The default i.e. org.apache.hadoop.yarn.util.resource.DefaultResourceCalculator only uses Memory while DominantResourceCalculator uses Dominant-resource to compare multi-dimensional resources such as Memory, CPU etc. A Java ResourceCalculator class name is expected.
  • Data Locality
Property Description
yarn.scheduler.capacity.node-locality-delay Number of missed scheduling opportunities after which the CapacityScheduler attempts to schedule rack-local containers. Typically, this should be set to number of nodes in the cluster. By default is setting approximately number of nodes in one rack which is 40. Positive integer value is expected.
  • Container Allocation per NodeManager Heartbeat

The CapacityScheduler supports the following parameters to control how many containers can be allocated in each NodeManager heartbeat.

Property Description
yarn.scheduler.capacity.per-node-heartbeat.multiple-assignments-enabled Whether to allow multiple container assignments in one NodeManager heartbeat. Defaults to true.
yarn.scheduler.capacity.per-node-heartbeat.maximum-container-assignments If multiple-assignments-enabled is true, the maximum amount of containers that can be assigned in one NodeManager heartbeat. Defaults to -1, which sets no limit.
yarn.scheduler.capacity.per-node-heartbeat.maximum-offswitch-assignments If multiple-assignments-enabled is true, the maximum amount of off-switch containers that can be assigned in one NodeManager heartbeat. Defaults to 1, which represents only one off-switch allocation allowed in one heartbeat.

Reviewing the configuration of the CapacityScheduler

Once the installation and configuration is completed, you can review it after starting the YARN cluster from the web-ui.

  • Start the YARN cluster in the normal manner.

  • Open the ResourceManager web UI.

  • The /scheduler web-page should show the resource usages of individual queues.

Changing Queue Configuration

Changing queue/scheduler properties and adding/removing queues can be done in two ways, via file or via API. This behavior can be changed via yarn.scheduler.configuration.store.class in yarn-site.xml. Possible values are file, which allows modifying properties via file; memory, which allows modifying properties via API, but does not persist changes across restart; leveldb, which allows modifying properties via API and stores changes in leveldb backing store; and zk, which allows modifying properties via API and stores changes in zookeeper backing store. The default value is file.

Changing queue configuration via file

To edit by file, you need to edit conf/capacity-scheduler.xml and run yarn rmadmin -refreshQueues.

$ vi $HADOOP_CONF_DIR/capacity-scheduler.xml
$ $HADOOP_YARN_HOME/bin/yarn rmadmin -refreshQueues

Changing queue configuration via API

Editing by API uses a backing store for the scheduler configuration. To enable this, the following parameters can be configured in yarn-site.xml.

Note: This feature is in alpha phase and is subject to change.

Property Description
yarn.scheduler.configuration.store.class The type of backing store to use, as described above.
yarn.scheduler.configuration.mutation.acl-policy.class An ACL policy can be configured to restrict which users can modify which queues. Default value is org.apache.hadoop.yarn.server.resourcemanager.scheduler.DefaultConfigurationMutationACLPolicy, which only allows YARN admins to make any configuration modifications. Another value is org.apache.hadoop.yarn.server.resourcemanager.scheduler.capacity.conf.QueueAdminConfigurationMutationACLPolicy, which only allows queue modifications if the caller is an admin of the queue.
yarn.scheduler.configuration.store.max-logs Configuration changes are audit logged in the backing store, if using leveldb or zookeeper. This configuration controls the maximum number of audit logs to store, dropping the oldest logs when exceeded. Default is 1000.
yarn.scheduler.configuration.leveldb-store.path The storage path of the configuration store when using leveldb. Default value is ${hadoop.tmp.dir}/yarn/system/confstore.
yarn.scheduler.configuration.leveldb-store.compaction-interval-secs The interval for compacting the configuration store in seconds, when using leveldb. Default value is 86400, or one day.
yarn.scheduler.configuration.zk-store.parent-path The zookeeper root node path for configuration store related information, when using zookeeper. Default value is /confstore.

Note: When enabling scheduler configuration mutations via yarn.scheduler.configuration.store.class, yarn rmadmin -refreshQueues will be disabled, i.e. it will no longer be possible to update configuration via file.

See the YARN Resource Manager REST API for examples on how to change scheduler configuration via REST, and YARN Commands Reference for examples on how to change scheduler configuration via command line.

Updating a Container (Experimental - API may change in the future)

Once an Application Master has received a Container from the Resource Manager, it may request the Resource Manager to update certain attributes of the container.

Currently only two types of container updates are supported:

  • Resource Update : Where the AM can request the RM to update the resource size of the container. For eg: Change the container from a 2GB, 2 vcore container to a 4GB, 2 vcore container.
  • ExecutionType Update : Where the AM can request the RM to update the ExecutionType of the container. For eg: Change the execution type from GUARANTEED to OPPORTUNISTIC or vice versa.

This is facilitated by the AM populating the updated_containers field, which is a list of type UpdateContainerRequestProto, in AllocateRequestProto. The AM can make multiple container update requests in the same allocate call.

The schema of the UpdateContainerRequestProto is as follows:

message UpdateContainerRequestProto {
  required int32 container_version = 1;
  required ContainerIdProto container_id = 2;
  required ContainerUpdateTypeProto update_type = 3;
  optional ResourceProto capability = 4;
  optional ExecutionTypeProto execution_type = 5;
}

The ContainerUpdateTypeProto is an enum:

enum ContainerUpdateTypeProto {
  INCREASE_RESOURCE = 0;
  DECREASE_RESOURCE = 1;
  PROMOTE_EXECUTION_TYPE = 2;
  DEMOTE_EXECUTION_TYPE = 3;
}

As constrained by the above enum, the scheduler currently supports changing either the resource update OR executionType of a container in one update request.

The AM must also provide the latest ContainerProto it received from the RM. This is the container which the RM will attempt to update.

If the RM is able to update the requested container, the updated container will be returned, in the updated_containers list field of type UpdatedContainerProto in the AllocateResponseProto return value of either the same allocate call or in one of the subsequent calls.

The schema of the UpdatedContainerProto is as follows:

message UpdatedContainerProto {
  required ContainerUpdateTypeProto update_type = 1;
  required ContainerProto container = 2;
}

It specifies the type of container update that was performed on the Container and the updated Container object which container an updated token.

The container token can then be used by the AM to ask the corresponding NM to either start the container, if the container has not already been started or update the container using the updated token.

The DECREASE_RESOURCE and DEMOTE_EXECUTION_TYPE container updates are automatic - the AM does not explicitly have to ask the NM to decrease the resources of the container. The other update types require the AM to explicitly ask the NM to update the container.

If the yarn.resourcemanager.auto-update.containers configuration parameter is set to true (false by default), The RM will ensure that all container updates are automatic.