hadoop.tmp.dir/tmp/hadoop-${}A base for other temporary directories.
hadoop.native.libtrueShould native hadoop libraries, if present, be used.
hadoop.http.filter.initializersA comma separated list of class names. Each class in the list must extend org.apache.hadoop.http.FilterInitializer. The corresponding Filter will be initialized. Then, the Filter will be applied to all user facing jsp and servlet web pages. The ordering of the list defines the ordering of the filters. for user to group mapping (get groups for a given user) service-level authorization enabled? Indicates if administrator ACLs are required to access instrumentation servlets (JMX, METRICS, CONF, STACKS). values are simple (no authentication), and kerberos whether tokens always use IP addresses. DNS changes will not be detected if this option is enabled. Existing client connections that break will always reconnect to the IP of the original host. New clients will connect to the host's new IP but fail to locate a token. Disabling this option will allow existing and new clients to detect an IP change and continue to locate the new host's token. enabled, use KSSL to authenticate HTTP connections to the NameNode. Due to a bug in JDK6, using KSSL requires one to configure Kerberos tickets to use encryption types that are known to be cryptographically weak. If disabled, SPNEGO will be used for HTTP authentication, which supports stronger encryption types.
hadoop.logfile.size10000000The max size of each log file
hadoop.logfile.count10The max number of log files
io.file.buffer.size4096The size of buffer for use in sequence files. The size of this buffer should probably be a multiple of hardware page size (4096 on Intel x86), and it determines how much data is buffered during read and write operations.
io.bytes.per.checksum512The number of bytes per checksum. Must not be larger than io.file.buffer.size.
io.skip.checksum.errorsfalseIf true, when a checksum error is encountered while reading a sequence file, entries are skipped, instead of throwing an exception.,,, list of the compression codec classes that can be used for compression/decompression. list of serialization classes that can be used for obtaining serializers and deserializers.
fs.default.namefile:///The name of the default file system. A URI whose scheme and authority determine the FileSystem implementation. The uri's scheme determines the config property (fs.SCHEME.impl) naming the FileSystem implementation class. The uri's authority is used to determine the host, port, etc. for a filesystem.
fs.trash.interval0Number of minutes between trash checkpoints. If zero, the trash feature is disabled.
fs.file.implorg.apache.hadoop.fs.LocalFileSystemThe FileSystem for file: uris.
fs.hdfs.implorg.apache.hadoop.hdfs.DistributedFileSystemThe FileSystem for hdfs: uris.
fs.s3.implorg.apache.hadoop.fs.s3.S3FileSystemThe FileSystem for s3: uris.
fs.s3n.implorg.apache.hadoop.fs.s3native.NativeS3FileSystemThe FileSystem for s3n: (Native S3) uris.
fs.kfs.implorg.apache.hadoop.fs.kfs.KosmosFileSystemThe FileSystem for kfs: uris.
fs.ftp.implorg.apache.hadoop.fs.ftp.FTPFileSystemThe FileSystem for ftp: uris.
fs.ramfs.implorg.apache.hadoop.fs.InMemoryFileSystemThe FileSystem for ramfs: uris.
fs.har.implorg.apache.hadoop.fs.HarFileSystemThe filesystem for Hadoop archives.
fs.har.impl.disable.cachetrueDon't cache 'har' filesystem instances.
fs.checkpoint.dir${hadoop.tmp.dir}/dfs/namesecondaryDetermines where on the local filesystem the DFS secondary name node should store the temporary images to merge. If this is a comma-delimited list of directories then the image is replicated in all of the directories for redundancy.
fs.checkpoint.edits.dir${fs.checkpoint.dir}Determines where on the local filesystem the DFS secondary name node should store the temporary edits to merge. If this is a comma-delimited list of directoires then teh edits is replicated in all of the directoires for redundancy. Default value is same as fs.checkpoint.dir
fs.checkpoint.period3600The number of seconds between two periodic checkpoints.
fs.checkpoint.size67108864The size of the current edit log (in bytes) that triggers a periodic checkpoint even if the fs.checkpoint.period hasn't expired.
fs.s3.block.size67108864Block size to use when writing files to S3.
fs.s3.buffer.dir${hadoop.tmp.dir}/s3Determines where on the local filesystem the S3 filesystem should store files before sending them to S3 (or after retrieving them from S3).
fs.s3.maxRetries4The maximum number of retries for reading or writing files to S3, before we signal failure to the application.
fs.s3.sleepTimeSeconds10The number of seconds to sleep between each S3 retry.
local.cache.size10737418240The limit on the size of cache you want to keep, set by default to 10GB. This will act as a soft limit on the cache directory for out of band data.
io.seqfile.compress.blocksize1000000The minimum block size for compression in block compressed SequenceFiles.
io.seqfile.lazydecompresstrueShould values of block-compressed SequenceFiles be decompressed only when necessary.
io.seqfile.sorter.recordlimit1000000The limit on number of records to be kept in memory in a spill in SequenceFiles.Sorter
io.mapfile.bloom.size1048576The size of BloomFilter-s used in BloomMapFile. Each time this many keys is appended the next BloomFilter will be created (inside a DynamicBloomFilter). Larger values minimize the number of filters, which slightly increases the performance, but may waste too much space if the total number of keys is usually much smaller than this number.
io.mapfile.bloom.error.rate0.005The rate of false positives in BloomFilter-s used in BloomMapFile. As this value decreases, the size of BloomFilter-s increases exponentially. This value is the probability of encountering false positives (default is 0.5%).
hadoop.util.hash.typemurmurThe default implementation of Hash. Currently this can take one of the two values: 'murmur' to select MurmurHash and 'jenkins' to select JenkinsHash.
ipc.client.idlethreshold4000Defines the threshold number of connections after which connections will be inspected for idleness.
ipc.client.kill.max10Defines the maximum number of clients to disconnect in one go.
ipc.client.connection.maxidletime10000The maximum time in msec after which a client will bring down the connection to the server.
ipc.client.connect.max.retries10Indicates the number of retries a client will make to establish a server connection.
ipc.server.listen.queue.size128Indicates the length of the listen queue for servers accepting client connections.
ipc.server.tcpnodelayfalseTurn on/off Nagle's algorithm for the TCP socket connection on the server. Setting to true disables the algorithm and may decrease latency with a cost of more/smaller packets.
ipc.client.tcpnodelayfalseTurn on/off Nagle's algorithm for the TCP socket connection on the client. Setting to true disables the algorithm and may decrease latency with a cost of more/smaller packets.
webinterface.private.actionsfalse If set to true, the web interfaces of JT and NN may contain actions, such as kill job, delete file, etc., that should not be exposed to public. Enable this option if the interfaces are only reachable by those who have the right authorization. Default SocketFactory to use. This parameter is expected to be formatted as "package.FactoryClassName".
hadoop.rpc.socket.factory.class.ClientProtocol SocketFactory to use to connect to a DFS. If null or empty, use hadoop.rpc.socket.class.default. This socket factory is also used by DFSClient to create sockets to DataNodes.
hadoop.socks.server Address (host:port) of the SOCKS server to be used by the SocksSocketFactory. The default implementation of the DNSToSwitchMapping. It invokes a script specified in to resolve node names. If the value for is not set, the default value of DEFAULT_RACK is returned for all node names. The default implementation of NetworkTopology which is classic three layer one. The script name that should be invoked to resolve DNS names to NetworkTopology names. Example: the script would take as an argument, and return /rack1 as the output.
topology.script.number.args100 The max number of args that the script configured with should be run with. Each arg is an IP address. NativeIO maintains a cache from UID to UserName. This is the timeout for an entry in that cache.
hadoop.http.authentication.typesimple Defines authentication used for Oozie HTTP endpoint. Supported values are: simple | kerberos | #AUTHENTICATION_HANDLER_CLASSNAME#
hadoop.http.authentication.token.validity36000 Indicates how long (in seconds) an authentication token is valid before it has to be renewed.
hadoop.http.authentication.signature.secret.file${user.home}/hadoop-http-auth-signature-secret The signature secret for signing the authentication tokens. If not set a random secret is generated at startup time. The same secret should be used for JT/NN/DN/TT configurations.
hadoop.http.authentication.cookie.domain The domain to use for the HTTP cookie that stores the authentication token. In order to authentiation to work correctly across all Hadoop nodes web-consoles the domain must be correctly set. IMPORTANT: when using IP addresses, browsers ignore cookies with domain settings. For this setting to work properly all nodes in the cluster must be configured to generate URLs with hostname.domain names on it.
hadoop.http.authentication.simple.anonymous.allowedtrue Indicates if anonymous requests are allowed when using 'simple' authentication.
hadoop.http.authentication.kerberos.principalHTTP/localhost@LOCALHOST Indicates the Kerberos principal to be used for HTTP endpoint. The principal MUST start with 'HTTP/' as per Kerberos HTTP SPNEGO specification.
hadoop.http.authentication.kerberos.keytab${user.home}/hadoop.keytab Location of the keytab file with the credentials for the principal. Referring to the same keytab file Oozie uses for its Kerberos credentials for Hadoop.
hadoop.relaxed.worker.version.checkfalse By default datanodes refuse to connect to namenodes if their build revision (svn revision) do not match, and tasktrackers refuse to connect to jobtrackers if their build version (version, revision, user, and source checksum) do not match. This option changes the behavior of hadoop workers to only check for a version match (eg "1.0.2") but ignore the other build fields (revision, user, and source checksum).
hadoop.skip.worker.version.checkfalse By default datanodes refuse to connect to namenodes if their build revision (svn revision) do not match, and tasktrackers refuse to connect to jobtrackers if their build version (version, revision, user, and source checksum) do not match. This option changes the behavior of hadoop workers to skip doing a version check at all. This option supersedes the 'hadoop.relaxed.worker.version.check' option.
hadoop.jetty.logs.serve.aliasestrue Enable/Disable aliases serving from jetty
ipc.client.fallback-to-simple-auth-allowedfalse When a client is configured to attempt a secure connection, but attempts to connect to an insecure server, that server may instruct the client to switch to SASL SIMPLE (unsecure) authentication. This setting controls whether or not the client will accept this instruction from the server. When false (the default), the client will not allow the fallback to SIMPLE authentication, and will abort the connection.