org.apache.hadoop.mapred
Class OutputCommitter

java.lang.Object
  extended by org.apache.hadoop.mapreduce.OutputCommitter
      extended by org.apache.hadoop.mapred.OutputCommitter
Direct Known Subclasses:
FileOutputCommitter

@InterfaceAudience.Public
@InterfaceStability.Stable
public abstract class OutputCommitter
extends OutputCommitter

OutputCommitter describes the commit of task output for a Map-Reduce job.

The Map-Reduce framework relies on the OutputCommitter of the job to:

  1. Setup the job during initialization. For example, create the temporary output directory for the job during the initialization of the job.
  2. Cleanup the job after the job completion. For example, remove the temporary output directory after the job completion.
  3. Setup the task temporary output.
  4. Check whether a task needs a commit. This is to avoid the commit procedure if a task does not need commit.
  5. Commit of the task output.
  6. Discard the task commit.
The methods in this class can be called from several different processes and from several different contexts. It is important to know which process and which context each is called from. Each method should be marked accordingly in its documentation. It is also important to note that not all methods are guaranteed to be called once and only once. If a method is not guaranteed to have this property the output committer needs to handle this appropriately. Also note it will only be in rare situations where they may be called multiple times for the same task.

See Also:
FileOutputCommitter, JobContext, TaskAttemptContext

Constructor Summary
OutputCommitter()
           
 
Method Summary
 void abortJob(JobContext jobContext, int status)
          For aborting an unsuccessful job's output.
 void abortJob(JobContext context, org.apache.hadoop.mapreduce.JobStatus.State runState)
          This method implements the new interface by calling the old method.
abstract  void abortTask(TaskAttemptContext taskContext)
          Discard the task output.
 void abortTask(TaskAttemptContext taskContext)
          This method implements the new interface by calling the old method.
 void cleanupJob(JobContext jobContext)
          Deprecated. Use commitJob(JobContext) or abortJob(JobContext, int) instead.
 void cleanupJob(JobContext context)
          Deprecated. Use commitJob(org.apache.hadoop.mapreduce.JobContext) or abortJob(org.apache.hadoop.mapreduce.JobContext, org.apache.hadoop.mapreduce.JobStatus.State) instead.
 void commitJob(JobContext jobContext)
          For committing job's output after successful job completion.
 void commitJob(JobContext context)
          This method implements the new interface by calling the old method.
abstract  void commitTask(TaskAttemptContext taskContext)
          To promote the task's temporary output to final output location.
 void commitTask(TaskAttemptContext taskContext)
          This method implements the new interface by calling the old method.
 boolean isRecoverySupported()
          Deprecated. Use isRecoverySupported(JobContext) instead.
 boolean isRecoverySupported(JobContext jobContext)
          Is task output recovery supported for restarting jobs? If task output recovery is supported, job restart can be done more efficiently.
 boolean isRecoverySupported(JobContext context)
          This method implements the new interface by calling the old method.
abstract  boolean needsTaskCommit(TaskAttemptContext taskContext)
          Check whether task needs a commit.
 boolean needsTaskCommit(TaskAttemptContext taskContext)
          This method implements the new interface by calling the old method.
 void recoverTask(TaskAttemptContext taskContext)
          Recover the task output.
 void recoverTask(TaskAttemptContext taskContext)
          This method implements the new interface by calling the old method.
abstract  void setupJob(JobContext jobContext)
          For the framework to setup the job output during initialization.
 void setupJob(JobContext jobContext)
          This method implements the new interface by calling the old method.
abstract  void setupTask(TaskAttemptContext taskContext)
          Sets up output for the task.
 void setupTask(TaskAttemptContext taskContext)
          This method implements the new interface by calling the old method.
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Constructor Detail

OutputCommitter

public OutputCommitter()
Method Detail

setupJob

public abstract void setupJob(JobContext jobContext)
                       throws IOException
For the framework to setup the job output during initialization. This is called from the application master process for the entire job. This will be called multiple times, once per job attempt.

Parameters:
jobContext - Context of the job whose output is being written.
Throws:
IOException - if temporary output could not be created

cleanupJob

@Deprecated
public void cleanupJob(JobContext jobContext)
                throws IOException
Deprecated. Use commitJob(JobContext) or abortJob(JobContext, int) instead.

For cleaning up the job's output after job completion. This is called from the application master process for the entire job. This may be called multiple times.

Parameters:
jobContext - Context of the job whose output is being written.
Throws:
IOException

commitJob

public void commitJob(JobContext jobContext)
               throws IOException
For committing job's output after successful job completion. Note that this is invoked for jobs with final runstate as SUCCESSFUL. This is called from the application master process for the entire job. This is guaranteed to only be called once. If it throws an exception the entire job will fail.

Parameters:
jobContext - Context of the job whose output is being written.
Throws:
IOException

abortJob

public void abortJob(JobContext jobContext,
                     int status)
              throws IOException
For aborting an unsuccessful job's output. Note that this is invoked for jobs with final runstate as JobStatus.FAILED or JobStatus.KILLED. This is called from the application master process for the entire job. This may be called multiple times.

Parameters:
jobContext - Context of the job whose output is being written.
status - final runstate of the job
Throws:
IOException

setupTask

public abstract void setupTask(TaskAttemptContext taskContext)
                        throws IOException
Sets up output for the task. This is called from each individual task's process that will output to HDFS, and it is called just for that task. This may be called multiple times for the same task, but for different task attempts.

Parameters:
taskContext - Context of the task whose output is being written.
Throws:
IOException

needsTaskCommit

public abstract boolean needsTaskCommit(TaskAttemptContext taskContext)
                                 throws IOException
Check whether task needs a commit. This is called from each individual task's process that will output to HDFS, and it is called just for that task.

Parameters:
taskContext -
Returns:
true/false
Throws:
IOException

commitTask

public abstract void commitTask(TaskAttemptContext taskContext)
                         throws IOException
To promote the task's temporary output to final output location. If needsTaskCommit(TaskAttemptContext) returns true and this task is the task that the AM determines finished first, this method is called to commit an individual task's output. This is to mark that tasks output as complete, as commitJob(JobContext) will also be called later on if the entire job finished successfully. This is called from a task's process. This may be called multiple times for the same task, but different task attempts. It should be very rare for this to be called multiple times and requires odd networking failures to make this happen. In the future the Hadoop framework may eliminate this race.

Parameters:
taskContext - Context of the task whose output is being written.
Throws:
IOException - if commit is not

abortTask

public abstract void abortTask(TaskAttemptContext taskContext)
                        throws IOException
Discard the task output. This is called from a task's process to clean up a single task's output that can not yet been committed. This may be called multiple times for the same task, but for different task attempts.

Parameters:
taskContext -
Throws:
IOException

isRecoverySupported

@Deprecated
public boolean isRecoverySupported()
Deprecated. Use isRecoverySupported(JobContext) instead.

This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Overrides:
isRecoverySupported in class OutputCommitter
Returns:
true if task output recovery is supported, false otherwise
See Also:
OutputCommitter.recoverTask(TaskAttemptContext)

isRecoverySupported

public boolean isRecoverySupported(JobContext jobContext)
                            throws IOException
Is task output recovery supported for restarting jobs? If task output recovery is supported, job restart can be done more efficiently.

Parameters:
jobContext - Context of the job whose output is being written.
Returns:
true if task output recovery is supported, false otherwise
Throws:
IOException
See Also:
recoverTask(TaskAttemptContext)

recoverTask

public void recoverTask(TaskAttemptContext taskContext)
                 throws IOException
Recover the task output. The retry-count for the job will be passed via the MRConstants.APPLICATION_ATTEMPT_ID key in JobContext.getConfiguration() for the OutputCommitter. This is called from the application master process, but it is called individually for each task. If an exception is thrown the task will be attempted again.

Parameters:
taskContext - Context of the task whose output is being recovered
Throws:
IOException

setupJob

public final void setupJob(JobContext jobContext)
                    throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Specified by:
setupJob in class OutputCommitter
Parameters:
jobContext - Context of the job whose output is being written.
Throws:
IOException - if temporary output could not be created

cleanupJob

@Deprecated
public final void cleanupJob(JobContext context)
                      throws IOException
Deprecated. Use commitJob(org.apache.hadoop.mapreduce.JobContext) or abortJob(org.apache.hadoop.mapreduce.JobContext, org.apache.hadoop.mapreduce.JobStatus.State) instead.

This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Overrides:
cleanupJob in class OutputCommitter
Parameters:
context - Context of the job whose output is being written.
Throws:
IOException

commitJob

public final void commitJob(JobContext context)
                     throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Overrides:
commitJob in class OutputCommitter
Parameters:
context - Context of the job whose output is being written.
Throws:
IOException

abortJob

public final void abortJob(JobContext context,
                           org.apache.hadoop.mapreduce.JobStatus.State runState)
                    throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Overrides:
abortJob in class OutputCommitter
Parameters:
context - Context of the job whose output is being written.
runState - final runstate of the job
Throws:
IOException

setupTask

public final void setupTask(TaskAttemptContext taskContext)
                     throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Specified by:
setupTask in class OutputCommitter
Parameters:
taskContext - Context of the task whose output is being written.
Throws:
IOException

needsTaskCommit

public final boolean needsTaskCommit(TaskAttemptContext taskContext)
                              throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Specified by:
needsTaskCommit in class OutputCommitter
Returns:
true/false
Throws:
IOException

commitTask

public final void commitTask(TaskAttemptContext taskContext)
                      throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Specified by:
commitTask in class OutputCommitter
Parameters:
taskContext - Context of the task whose output is being written.
Throws:
IOException - if commit is not successful.

abortTask

public final void abortTask(TaskAttemptContext taskContext)
                     throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Specified by:
abortTask in class OutputCommitter
Throws:
IOException

recoverTask

public final void recoverTask(TaskAttemptContext taskContext)
                       throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Overrides:
recoverTask in class OutputCommitter
Parameters:
taskContext - Context of the task whose output is being recovered
Throws:
IOException

isRecoverySupported

public final boolean isRecoverySupported(JobContext context)
                                  throws IOException
This method implements the new interface by calling the old method. Note that the input types are different between the new and old apis and this is a bridge between the two.

Overrides:
isRecoverySupported in class OutputCommitter
Parameters:
context - Context of the job whose output is being written.
Returns:
true if task output recovery is supported, false otherwise
Throws:
IOException
See Also:
OutputCommitter.recoverTask(TaskAttemptContext)


Copyright © 2014 Apache Software Foundation. All Rights Reserved.